3. Please wait for 150 seconds.
z
If download fail, please repeat the step 1~3 to download again.
Do not power off the unit when it is being upgraded.
Backup / Restore Settings
The current system settings can be backup as a file onto the local hard drive by
clicking “
Backup
”. The saved file can be loaded back on the Radio by clicking
“
Browse
”. When you have selected the settings file, click “
Retrieve
” to begin the
process. Furthermore, you may click “
Restore
” to factory default settings.
Figure 3-25 Backup / Restore Settings page
Event Log
Enable SysLog if you have a Syslog Server on your network environment. If enable,
you need to input the Syslog Server IP Address (default is 0.0.0.0) and the port
number your Syslog Server is configured to use. The default port number is 514. Click
“Apply” if you made any changes.
Browse
RedFire 200e Radio User Manual
Chapter 3 Configuring the 802.11g Radio
Management
47
Summary of Contents for RedFire 200e
Page 1: ......