Stealth Mode
For special applications the Secure Mic’s Blue LED on the front of the Secure
Mic can be temporarily disabled along with all audible alert tones. This is
achieved by holding down the VOLUME UP/DOWN (both) while powering
up the unit. To turn the LED back on, simply power down and power back
up. The feature may be of particular use to “Law Enforcement Users” who
may prudently prefer in some situations to not be walking around at night
with a blue light glowing on their shoulder. Alternatively, Stealth mode can
be permanently enabled via re-programming the X10DR Secure Mic.
Accessory Mic Boost
Users can choose to increase an audio accessory’s microphone sensitivity
on X10DR models fitted with the Hirose accessory port to cater for sensitivity
requirements or variations in headset manufacturer’s specifications. To
activate the higher sensitivity, the X10DR’s blue VOLUME UP button should
be held down while powering up. The user will thereafter hear 2 short
confirmation beeps at the end of each start up tone sequence. To revert
to standard operation, the unit should be powered up with the VOLUME
DOWN blue button held down.
NOTE: Enabling the mic boost does NOT effect the l internal front cover microphone.
The default sensitivity can be adjusted using the XPK Field Programmer.
Remote Monitor (Elite Models only)
A unique input is provided on Elite series X10DR installations which allows
that users audio to be remotely activated. The activation may be from
a manual switch installed in the vehicle (supplied by others) or it may
connect to a mobile radio suitably equipped to allow a despatcher to
remotely send a command to the users vehicle mobile that can be used
in turn to activate the remote monitor function. Depending on the specific
application a XSJB special function may be required.
Public Address /In-Car Monitor (Elite Models only)
The X10DR Elite model provides a powerful 8 watt RMS audio output that
can be used with an optional external speaker, to allow a Secure Mic
user’s transmissions to be audibly monitored in the vehicle when away
from the vehicle or to allow public address. Press buttons on the base of
the gateway allows the audio volume to be adjusted up or down. Speaker
connection is via a 3.5mm mono socket in the base of the gateway.
In-out of cradle remote sensing (Elite Models only)
The Elite gateway cradle provides an externally accessible indication of
when the secure mic is in the gateway cradle or not. This can be used
for automatic enabling of functions such as lone worker or other remote
electronic devices. A XSJB is usually used with this feature.
11
Summary of Contents for X10DR CLASSIC
Page 1: ...User Manual ...