R01.i
RT System 2 v2.3 Deployment Guide
123
© 2010-2014 Wireless Seismic, Inc. All rights reserved.
5. Point-to-Multipoint Backhaul
Final Communication Test
–
Poor line-of-sight
–
Bad antenna connection
–
Faulty hardware (cable and/or antenna)
Ź
WSI-MAX (AirMax) Capacity >40%. If the value is < 40%, note the following:
–
The maximum capacity for the titanium bullet is 50%
–
Capacity is a reflection of quality. If the quality improves, the capacity
should also improve.
–
Poor capacity is typically the result of a misaligned antenna.
Ź
Click AP Information in the Monitor area. Verify that the Access Point Signal
Strength is between -80 dBm and -65 dBm.
c
Verify that line station radios are pointing in the correct direction.
d
Raise the mast towers to provide the least obstructed view as is reasonable.
e
Check the condition of the antenna panels.
f
Check for frayed cables or water intrusion.
