Wireless Sensors, LLC
Ethernet Gateway Model GWAY-1100
Version 2.0 © July 2013
4 / 35
QUICK START GUIDE
Getting started with the GWAY-1100 is simple. Just follow a few easy steps:
1.
Apply power to the GWAY-1100.
The
green PWR/ACT LED will begin to
flash at one-second intervals, indicat-
ing that the product is operating nor-
mally. Power must be 5 volts at 400
milliamp (minimum).
2.
Connect it to your Network
. Connect
a live network cable to the Ethernet
Port on the device. The green LED on the Ethernet connector will illuminate, indicating a
valid network connection. The yellow LED on the Ethernet connector blinks only when
there is network traffic.
3.
Connect a 1-Wire Device
. Connect a supported 1-Wire device to any of the 1-Wire RJ12
connectors.
4.
Determine the IP address of the GWAY-1100
by checking your DHCP server logs or
running the GWAY-1100 scanner software. If the GWAY-1100 does not find a DHCP serv-
er running on your network, it will default to
the following IP address: 169.254.1.1.
5.
Configure your device
. Type the IP ad-
dress of the GWAY-1100 into your Web
browser (e.g., http://192.168.1.27) and
press enter. Select the tab
“Network Setup”.
When the name and password is request-
ed, enter “
admin
” for the name and
“
sensicast
” for the password. A Web page
similar to the one shown to the right will en-
able you to configure and monitor various
aspects of your GWAY-1100.
6.
CONGRATULATIONS!
You have successfully installed your Wireless Sensors
’ GWAY-
1100.
Please refer to the Web Access section of the Operation Manual to obtain an un-
derstanding of the function of each of the Web pages served by the GWAY-1100.
Some things to keep in mind:
The GWAY-1100 has an internal flash drive that may be used to set it to a fixed IP address. See the section
Configuration/USB
for more information.
No support is provided for GWAY-1100 IP address identification when utilizing any method other than the
GWAY-1100 scanner software
.
Please consult your network administrator if you cannot locate the DHCP
address.
