W-DMX MicroBox G6
2022-09-30
Introduction
Welcome to the Wireless DMX family! We hope you enjoy your brand-new devices – Wireless Solution is
the industry’s leading system for transmitting and receiving DMX signals reliably, and we thrive on avid
users like you who use our products. We appreciate all your constructive feedback!
Before you use, you must know: there are two main operating modes:
• [TX] Transmitter (to transmit DMX data as wireless signals)
• [RX] Receiver (to receive wireless signals and output as DMX)
All G6 products are backward compatible to Generation 3. In order to operate in compatibility mode,
please refer to 6.5 in this manual. By using the product in a compatibility mode, you will lose some
of the features present in other modes. Please refer to our helpdesk service if you want to find more
about which features you won’t be able to use in compatibility mode.
W-DMX™ G6 is compatible with CRMX™ protocol from LumenRadio AB. To use CRMX™ in your WDMX™
G6 product you will need to install the appropriate license on your device. This can be done using the
W-DMX™ Configurator App.
You may find W-DMX™ being used by several lighting manufacturers – this protocol, if specifically named
“W-DMX™” will work in an identical way as a branded Wireless Solution product, and it is therefore
compatible with our transmitters and receivers.
The W-DMX™ Technology
W-DMX™ is engineered by Wireless Solution Sweden to provide the same quality, reliability and perfor-
mance as any wired DMX link. The technology allows you to establish point-to-point links, point-to-
multipoint and multipoint-to-multipoint:
Wireless Solution Sweden AB
5
