25
WPS-165-DVR-4CH Installation and Users Manual
6.1. PRE-CAMERA SETUP
Pre-Camera Setup allows the
administrator to define fundamental
attributes for connected cameras.
In the Setup menu, press
▲▼◄►
on
the
remote to change the highlighted
option to Pre-Camera, and then press
ENTER to display Pre-Camera menu.
To navigate and operate this menu:
•
▲▼◄►
Press these buttons
▲▼◄►
on
the
remote
control to select an item.
Alternatively
use the mouse to select
an item.
• NUMERIC
Press these buttons on
the
remote control to change the camera. Alternatively
use the mouse to select
the desired camera.
• ESC
Press the ESC button on
the
remote control to escape from this menu and
return to the main menu.
Alternatively use the mouse to exit the sub menu by clicking on the “X.” If
the contents in this menu
have been modified, a Save dialog box will be displayed requesting the user
to save the changes.
Press
ENTER on
the
remote control to exit and save, ESC
to exit without saving. Another method to
escape is to use the mouse to “right-click,” and exit the sub
menu.
The following is a brief description for each item in the sub menu and its specific operations:
• COMPRESSION
This DVR uses the latest compression format (.h.264) for the most efficient use of storage space and
streaming flexibility. The Compression setting allows the administrator to further compress streaming video
to account for slow or bandwidth limited networks. Choose Normal for normal compression or select High
to enable the remote stream of the Video Streaming (See Section 9.4). The High setting will reduce the
resolution of the second stream to one of the four QCIF levels as set in Video Stream setting in the Network
setup (See Section 6.11).
• WATERMARK
An invisible, digitally-embedded security feature to protect against tampering of recorded content can be
added to the video file. If a downloaded h.264 clip has been altered, the PC based playback software will
alert the user with a message upon playback. The default setting is enabled.
• INSTALLED
Enable or disable cameras from this menu. The default setting is enabled.
• RESOLUTION
Allows individual camera channels to be set for their appropriate recording resolution. Allows for 960H
(960x480), D1 (720x480), Half 960H (960x240), Half D1 (720x240), 480x240, and CIF (360x240).
• PTZ ID
This feature has no function for this model of DVR.
