33
WPS-165-DVR-4CH Installation and Users Manual
• SEQ / CALL
Press these buttons on
the
remote control to decrease (SEQ) or
increase (CALL) the Sensitivity of
the motion detection area of this camera from 1 - 10 (1 is least
sensitive and 10 is most
sensitive). Alternatively use the mouse to select this icon and adjust the
sensitivity. We
recommend that the default setting (3) be used to start and adjusted as needed.
• /- ( +)
Press these buttons on the remote control to increase or decrease the number of grids required
to detect motion before the DVR will trigger motion detection recording and any associated events
Alternatively use the mouse to select this icon and adjust the number of grids.
• SEARCH
Press this button on
the
remote control to test the motion detection
of this camera. Grids in
green indicate that area that will detect motion. When motion is
detected, these grids will
change in color to red. Press this button again to exit testing.
Alternatively use the mouse to
select this icon to enter and exit testing mode.
• ESC
Press the ESC button on
the
remote control to escape from this menu
and return to the main
menu. Alternatively use the mouse to exit the sub menu by clicking on
the “X.” If the contents
in this menu have been modified, a Save dialog box will be displayed
requesting the user to
save the changes. Press ENTER on
the
remote
control to exit and save, ESC to exit without
saving. Another method to escape is to use the
mouse to “right-click,” and exit the sub menu.
