84
WPS-165-DVR-4CH Installation and Users Manual
8.3.4. PRE CAMERA
Pre-Camera setup allows the administrator to define fundamental attributes for connected cameras.
The following is a brief description for each item in this menu and its specific operations:
•
RESOLUTION
Allows individual camera channels to be set for their appropriate recording resolution. Allows for 960H
(960x480), D1 (720x480), Half 960H (960x240), Half D1 (720x240), 480x240, and CIF (360x240).
Note: While higher resolution offers more detail, it does require more hard drive storage space and higher
network bandwidth capacity for streaming.
• WATERMARK
An invisible, digitally embedded security feature to protect against tampering of recorded content.
If
a downloaded h.264 clip has been altered, the PC-based playback software will alert the user with
a
message upon playback. The default setting is enabled.
• MAX ID
Select the maximum number of cameras connected to the DVR.
• COMPRESSION
This DVR uses the latest compression format (.h.264) for the most efficient use of storage space and
streaming flexibility. The Compression setting allows the administrator to further compress streaming
video to account for slow or bandwidth-limited networks. Choose Normal for normal compression or
select High to enable the second stream of the Video Streaming (See Section 9.5). The High setting will
reduce the resolution of the second stream to one of the four QCIF levels as set in the Video Stream setting
in the Network tab (Section 9.3.3).
• INSTALLED
Enable or disable cameras in the system. The default setting is enabled.
•
PTZ ID
This feature has no function for this model of DVR.
