Page 8 of 15
Menu #17 -
Unit Temp
Read-only menu, tells the case temperature
Menu #18 -
IP
Adjustable list, display the IP address
Menu #19 -
SUB
Adjustable list, display the address of net mask
Menu #20 -
GW
Adjustable list, display the gateway address
Menu #21 -
TR1
Adjustable list, display the TRAP1 address
Menu #22 -
TR2
Adjustable list, display the TRAP2 address
Menu #23 -
LCD Contrast Level
Adjustable list, display the LCD contrast level adjustment
Menu #24 -
Reset Settings
Adjustable list, display the reset settings
4.1.3
Assistant manual
1.
Switch Mode (Set the mode of optical switch)
Select the menu mode need to modify, and press the button
at the same
time to enter modified status,press
▲
/
▼
button to choose the working mode of
optical switch,last press the button
at the same time to save.
2.
OP Route Status(set optic fiber route)
Select the menu mode need to modify, and press the button
at the same time
to enter modified status, press the button
/
to select mode of optic fiber route,
last press the button
at the same time to save.
3.
Op Switch Point (set switch point of optical switch)
Select the menu mode need to modify, and press the button
at the same time
to enter modified status, press the button
/
to increase or decrease the value,
last press the button
at the same time to save.
4.
Set output power
Under the menu of Set Output, press the
button at the same time to enter into
modified menu, press
/
button to increase or decrease value, press the
button at the same time to save and exit.
5.
Set IP
、
Submask
、
Gateway
、
Trap1
、
Trap2 menu
Choose IP, Submask, Gateway, Trap1,Trap2 menu, Press the
▲▼
to select the
