Page 9 of 15
menu that need to modify ,press the
▲
/
▼
at the same time to enter into the
modified menu, press the
▲▼
at same time to select the modified key mapping,
press the
▲
/
▼
button to modify the value on this position, and then press the
▲
▼
at same time to save and exit.
Such as, modify IP setting address menu, IP: 192.168.000.015, if need to change
5 to 6, press the
▲▼
at same time to enter into the IP address menu, press the
▲
▼
button at same time to select this position of 5 and then press the
▲
/
▼
button
to change the 5 to 6 , then press the
▲▼
button at same time to save, after
amending, the IP : 192.168.000.016.
6.
Set LCD Contrast Level menu
Choose LCD Contrast Level menu, press
▲▼
button at same time to enter modify
status, press
▲
/
▼
button to increase or decrease the value, press
▲▼
at same
time to save.
7.
Set Reset Settings menu
Choose Reset Setting menu, press
▲▼
button at same time to enter modify
status, press
/
button to select the restore factory setting, press the
button at the same time to save and exit.
5.0
PORT AND CABLE ASSIGNMENTS
HA5800A series provide the following manage port:
RS232 port: be suitable for examining HA5800A parameters and some
system configuration by PC machine RS232 port.
SNMP: Simple network management protocol
Before connection HA5800A series of the port, please read the following
instructions and port connectivity requirements.
5.1
Management Port (RJ-45)
5.1.1
Port Description
The HA5800A series management port connector type is RJ-45.
Figure 5.1.1 RJ–45 Connector Plug and Socket
The Management port (RJ-45) can be connected to any device that uses a standard
8
1
1
8
