O p e r a t i n g I n s t r u c t i o n s
OKTOPUS
®
GLASS-Jack
GL-CC 1200
Technical Documentation
BA 000 257
Page 7 of 28
(22)
Never
leave the lifted load unsupervised!
(23)
Do not suck wet elements
, because
a.
Working Load Limit is decreased considerably
and
b. the vacuum system or the control system of the OKTOPUS
®
could be damaged!
(24) After use, protect the suction pads of the OKTOPUS
®
against damage by using protec-
tion cowls!
(25)
Always
wear suitable protective clothing, helmets, gloves and safety shoes!
(26)
Never lift more than one
glass or façade element at a time!
(27) Comply with the stipulated
maintenance information
:
•
daily visual and functional inspection
(battery’s charge level, vacuum gauges,
suction pads, warning light, signal light, alarm buzzer, control panel)!
•
depending on the operating conditions,
but at least annually,
inspection by an ex-
pert!
(28) Never modify the OKTOPUS
®
in a way that safety is impaired.
Otherwise the manu-
facturer’s warranty will be void!
(29) Do not remove information signs, safety signs and inspection tags and plates from the
OKTOPUS
®
.
Otherwise the manufacturer’s warranty will be void!
2.3 Symbols and markings
Signal word
Meaning
Consequences of non-compliance
Warns of imminent
threat of danger
Death or serious injury or substantial
material damage as consequence.
Warns of potential
threat of danger
Death or serious injury or substantial
material damages are possible.
Warns of possibly
dangerous situation
Light injury or material damages are
possible.
Next to the type plate the following safety-related signs and pictographs are attached to the
OKTOPUS
®
:
(Working Load Limit OKTOPUS
®
)
(General information / Warning signs)
