Copyright ©2007-2009 WIS International
WISARD-550 Operators Guide
Clarity Design, Inc.
Page 2 of 4
July 6, 2009
Tag/shelf entry:
Scan the barcode on the bottom of the tag or enter the shelf number at the shelf prompt and press
<ENTER>.
Review:
Press the left arrow key once on the lower key pad to search the last entry.
Recording totals:
At the last entry press <END> once and your shelf totals will be displayed. Write the totals on
the tag if applicable.
Search entry/shelf/tag:
In review mode (as described above) there are four options:
1) Press the left arrow key repeatedly to locate the entry.
2) Press the up arrow key up to search down by shelf, once the shelf is found, press the left
or right arrow key to find the entry.
3) Press <SEARCH> on the lower key pad and enter the 4 digit tag number and 2 digit shelf
number. Then follow step 2 to find the entry.
4) Press <ALT> and then <SEARCH> to search for a specific SKU or UPC as opposed to
looking by tag/shelf.
Searching totals:
To recall totals from a previous shelf, enter review mode as described above then press up arrow
key to find the shelf. Then press <TOTAL> on lower key pad.
To view the totals of the current shelf, press <TOTAL>.
Press <END> when done to return to normal data entry.
