background image

SAGE L150m 

 

WISDOMAUDIO.COM 

One of the most remarkable things about the sound of well-designed planar magnetic 
speakers is their lack of thermal or dynamic compression. There are several reasons for 
this:  

 

The lightweight diaphragm responds quickly to even the smallest signals yet is 
robust enough to handle a great deal of power. 

 

 

The voice coil is laid out at and is exposed to the air on both sides; the large 
resulting surface area dissipates heat extremely quickly and efficiently. 

 

 

Since heat does not build up in the voice coil (as it does in conventional dynamic 
drivers), the load seen by the amplifier does not change at high power levels. 

 

When you become accustomed to the sound of your new 

Sage L150m 

speakers, 

conventional speakers sound a bit bland and lifeless. You may also discover yourself 
hearing details at even modest levels on the 

Sage L150m 

that were previously inaudible 

even at loud volumes on more conventional speakers. 

 

The “voice coil” in the planar magnetic driver is spread out over a large, at area that is 
exposed to the open air. As such, when a huge transient comes along, 

any heat that is 

generated is immediately dissipated. This compares quite favor- ably to other designs in 
which the voice coil is buried inside a massive piece of metal, where the heat has 
effectively no place to go.  

The excellent heat dissipation of these drivers makes them remarkably reliable. Planar 
magnetic speakers can handle a great deal of power without undue stress or audible 
strain. In fact, for a given size, they can handle 

many times 

the power of a traditional 

dynamic driver.  

Because the conductor of a planar magnetic driver is essentially a long, thin wire, it 
presents a purely resistive load to the amplifier. This is comparable to the simple test 
loads that amplifier companies use when measuring their amplifiers to show how terrific 
they are. As such, you can be assured that your amplifiers will sound and work their 
best.  

Authoritative, deep bass requires that you move a lot of air. We have chosen to use 
dynamic woofers for the bass because they can provide excellent performance at lower 
frequencies.  

To get comparable bass performance from a planar magnetic design, you would need to 
have a huge speaker that would be impractical in most domestic living spaces. It simply 

Summary of Contents for Sage L150m

















Reviews: