English_27
●
Camera Opera
ti
O
n
y
ViDEo ouTPuT
1
If the SPECIAL menu screen is displayed, use the Function Setup switch so
that the arrow indicates ‘VIDEO OUTPUT’.
2
Select a desired mode using the Function Setup switch.
-
HD : HD Video resolution(1920X1080)
-
SD : SD Video resolution
M
`
Please exit the menu and hold the “function setup switch” for over 5 seconds, it can switch HD/SD.
y
DaY/nighT :
You can display pictures in color or in black and white.
1
If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
‘DAY/NIGHT’.
2
Select a desired mode using the
Function Setup switch according
to the picture display you want.
-
auTo :
The mode is switched to ‘Color’ in a normal environment, but
switches to ‘B/W’ mode when ambient illumination is low. To set up
the switching time for AUTO mode, press the Function Setup switch.
You can turn on or off the burst signal on B/W mode.
y
BURST MODE : Activate or deactivate the burst mode to maintain or
remove the color signal.
y
DURATION : This function is used to select the brightness of light where
switching occurs.
y
DWELL TIME : You can select day/night switching delay time from.
→
3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
M
`
If you set the AGC mode to off on the exposure menu, you cannot switch the day/night mode to auto.
`
When a bright light source is in the screen or there are frequent brightness changes, if you use the
auto night/day mode, and set the switching time to short (3, 5 sec), a hunting can be caused. In this
situation, it is recommended to use the default setting (30 sec).
-
COLOR : The picture is always displayed in color.
-
B/W : The picture is always displayed in black and white.
y
BURST MODE : Activate or deactivate the burst mode to maintain or remove
the color signal.
AUTO SETUP
▶
1.
BURST MODE
ON
2.
DURATION
NORMAL
3.
DWELL TIME
30 SEC
4.
RETURN
Summary of Contents for SCD-6013
Page 33: ...English_33 specifications Dimension Unit mm inch ...
Page 34: ...MEMO ...