background image

TROUBLE SHOOTING                              

 
 

If the system does not function properly, check the following 
points before contacting the service center.     

Cause and remedies

 

Problems 

Receiver Camera 

No power(no 
picture/sound) 

AC adaptor was not 
plugged into the 
outlet properly.

 

AC adaptor was not   
plugged into the 
outlet properly.

 

Poor reception

 

Improper antenna 
direction. Improper 
channel setting

 

Check the distance   
and blocks.

 

Picture flicking

 

------ 

Strong spotlight in   
the field of view

 

Dim picture,   
picture too 
bright, too dark

 

Improper brightness 
control setting on 
your TV/Monitor

 

Lighting source in 
The field of view

 

Picture rolls and 
Jumps. 
scrambled  
picture 

Improper V-hold   
control setting on   
your TV/Monitor

 

----- 

Picture smaller 
than screen or 
volume weak 

House current may 
be too low 

House current may 
be too low 

 
 
 
 
 

1.CHARGE LED (RED) 

   Indicates that the built-in 

   battery is being charged. 

 

2.POWER JACK (DC 5V) 

    Plug the 5V adapter 

   (supplied). 

 

3.POWER ON LED 

   (GREEN) 

   Indicates that the power is 

   working or not. 

 

4.ANTENNA 

7

8

9

Summary of Contents for cw3510tx
















Reviews: