OPERATION
■
MANUAL MODE
Select the same channel with the SEL button on receiver as the
channel of camera.
■
AUTOMATIC MODE
Press SEL button on the receiver after CH 4 indicator is lit. It will
be in the sequencing mode.
Please check the explanation.
■
OPERATION WITH TV /MONITOR
1. If your color TV/MONITOR has A/V jacks, connect the
supplied A/V cable to TV’s A/V jacks and to the A/V jack on
the receiver. Be sure to connect the white connector of the
A/V cable to the AUDIO IN jack and the yellow connector of the
A/V cable to the VIDEO IN jack on the TV or MONITOR.
2. Plug the provided AC adapter (DC 8V 200mA) into the DC
jack on the receiver and the other end into AC outlet.
Make sure the POWER switch is in the OFF position beforehand.
3.Locate and orient the receiver to get optimal performance.
4.Be sure the TV/monitor and the receiver are turned on.
REDRAW THE PICTURE
TV/MONI
TOR
RECEIVER