II
The manual introduced how to install, use, process and maintain the laser engraving machine in detail. Before
unpacking and using the machine, please pay attention to the following points:
The operator should have relevant technical training, or supervised by the specially-assigned person.
The manual will help you know and process the machine in accordance with rules and regulations.
Many important tip included in the manual will help you process the machine safely, economical and reasonably.
If you could follow these tips, not only can avoid the risk of accidents, lower maintenance costs, reduce
downtime, but also can improve machine reliability and working life.
The manual should be stored in the machine side for inspection at any time.
The machine color in the manual is for reference, not related to the function.
Safety requirements
Improperly use of laser tube can cause personal injury, so be careful to learn the knowledge about the safety before
using, in order to avoid bodily harm, and to prevent the product or other connected products to be damaged. In order
to avoid possible danger, this product can only be used within the specified range.
(1)
Whenever laser must not point to themselves or others’ eyes, even the case is closed, there is the possibility on
opening with an error
(2)
Laser is not a toy, do not let children, mental retardation, and the people who do not understand laser characters
to use, in such cases, easily lead to injury.
(3)
The type of laser is not visible, so prohibit to put flammable, explosive materials near to the equipment, to avoid
deviation of laser leading fire.
(4)
The laser is not visible, so we propose to wear special goggles when use it.
(5)
Product to connect with ground. In addition to the product via power supply line and ground wire to connect with
ground. To avoiding static electricity wounding somebody, grounding wire must to be connected with the ground.
Before using, to ensure that the product is properly connected with ground.
(6)
in the machine work, machine top cover must be sealed to prevent the deviation of laser wounding.
(7)
Because there is laser and high pressure inside the machine, it is strictly prohibited for non-specialists to
disassemble machines without permission.
(8)
In the machine working process, the operator must always observe the work of machine (such as: Crochet
deformation, if the paper was blow higher by air compressor and blocked laser, if the machine sounds abnormal,
and temperature of circulating water, etc.). Operator is prohibited leave without authorization to avoid
unnecessary losses.
