English_25
●
C
A
MER
A
OPER
ATION
➎
Enter a title, move the cursor to ‘POS’ and press the
Function Setup switch. The entered title appears on
the screen. Select the position to display the title on
the screen by using the Function Setup switch and
press the Function Setup switch. When the position
is determined, select ‘END’ and press the Function
Setup switch to return to the DISPLAY menu.
M
`
When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen even if you
enter one.
`
and Numbers are available in this mode.
`
If you move the cursor to CLR and press the Function Setup switch, all the letters are
deleted. To edit a letter, change the cursor to the bottom left arrow and press the
Function Setup switch. Move the cursor over the letter to be edited, move the cursor
to the letter to be inserted and then press the Function Setup switch.
- FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue)
- LANGUAGE : You can select the menu language according to your requirements.
- RETURN : Return to the SPECIAL menu.
y
COAX :
You can select whether to use COAX communication.
y
IMAGE ADJ
❶
If the SPECIAL menu screen is displayed, use the Function Setup switch so that the
arrow indicates ‘IMAGE ADJ’.
❷
Select a desired mode using the
Function Setup switch.
- GAMMA : The setting range is 0.35 ~ 1.0.
The closer to 1.0 the setting is,
the darker it gets.
- PED LEVEL : The setting range is
1 ~ 100. The closer to
100 the setting is, the
higher the PED level
gets.
- COLOR GAIN : The setting range is 1 ~ 100. The smaller the setting value is the
smaller the color gain gets and the more color blind it gets.
- H-REV : Flip an image horizontally.
- V-REV : Flip an image vertically.
FRONT DOOR
IMAGE SETUP
▶
1.
GAMMA
USER
2.
PED LEVEL
I
IIIIIIIIIIIIIIIIIIII
5
3.
COLOR GAIN
IIIIIIIIIII
I
IIIIIIIII
50
4. H-REV
OFF
5. V-REV
OFF
6. SHARPNESS
ON
7.
RETURN
