alarm
Motion
Go to "Setup"
;
"Alarm"
;
"Motion"
;
"Motion" to enter into the interface.
•
Buzzer
: When detecting object moving, buzzer makes alarms (disable, 10
seconds, 20 seconds, 40 seconds and 60 seconds).
•
record
: When object motion is detected, the record channel setting will be
activated.
•
post recording
: After the alarm finishes, the duration time of the alarm
recording can be set as 30 seconds, 1 minute, 2 minutes and 5 minutes.
•
show Message
: Messages will be displayed on the screen when moving
object is detected and alarms are made.
•
send email
: When moving object is detected, send Email to the specified
Email address.
•
full screen
: When moving object is detected, messages will be displayed in
full screen.
exception
Go to "Setup"
;
"Alarm"
;
"Exception"
;
"Exception" to enter recording schedule for the NVR.
•
event type
: Support three abnormal types: No Space on Disk, Disk Error
and Video Loss.
- No Space on Disk : When camera detects object moving, alarm will
be activated. Sensitivity is subject to the actual application environment
test. Sensitivity is adjusted according to the sensitivity of moving object
detection and parameters are modified by combining the area setting.
- Disk Error : Alarm will appear when the HDD does not work due to
damage, power failure, HDD auto-overwrite off and insufficient space.
- Video Loss : When the NVR fails to receive video signals due to some
problems (camera damage,wireless signal is weak, power failure), the
alarm will appear.
•
use
: Active alarms for abnormal situations.
•
Buzzer
: How long the buzzer will sound (10s, 20s, 40s, 60s).
•
show Message
: You can set show message on the screen when alarm is detected.
•
send email
: Select to send Email to specified Email address when abnormal events appear.
NVR Menu
20_
NVR Menu
