Go to "Setup"
;
"Network"
;
"Email"
;
"Email Configuration" to enter into the menu interface. Receive or Send NVR alarm
Email and set parameters like Email address, SSL, Email Enable, and Interval.
•
encryption
: Disable, SSL, TLS and Auto optional. Auto means it can detect
the encryption type automatically. It is recommended to set the encryption
type as Auto.
•
sMtp port
: Mail sending port used by SMTP (Simple Mail Transfer Protocol).
Server is generally Port 25 or Port 465 when SSL is used by Gmail.
•
sMtp server
: Enter the address of the server for the mailbox in use.
•
user name
: Enter a server to connect to. For example, email "aaa@gmail.
com" should correspond to server "smtp.gmail.com"
•
password
: Enter the password of the SMTP server user.
•
sender
: Sender's mail address, which must correspond to the server used.
For example, mailbox "aaa@gmail.com" should correspond to server "smtp.
gmail.com".
•
receiver 1/2/3
: Recipient's mail address, used to receive alarm image and message from NVR side. If system alarms
continually and sends email images frequently, save the images to another location or remove them, so as to avoid excessive
space occupation and thereby affect your normal use of mailbox.
•
interval
: A mail will be sent every three minutes by default. If the time interval for mail notification is set too short, email server
may deem mails as junk mails, so they cannot be transferred normally.
Mailbox setting:
For example, if you are using Gmail, sign in to the GMAIL mailbox. https://mail.google.com
English
_23
●
nvr
Menu
