Wiseup W6000, User Manual

W6000

User Guide

I. Product Overview

1. Mode Button
2. Knob Cover for USB Port
3. Blue/Red Indicator Light
4. Power Button
5. Time Adjustment Knob
6. IR LEDs
7. Microphone
8. Camera Lens 

II. What’s in the Box

-1 × Watch Camera
-1 × USB Cable
-1 × AC110-240V to DC 5V Power Adapter
-1 × Backup Knob Cover for USB Port

III. Operation

>> Before using, please make sure your camera is fully charged and has been formatted 
on your PC computer using the USB cable provided.

3.1. POWER ON/OFF

3.1.1. Power on the camera by pressing the Power Button for 2 seconds. Both blue and 
red indicator lights will be illuminated for 3 seconds then turn off. The camera will start 
video recording automatically.
3.1.2. Power off the camera by pressing the Power Button for 2 seconds in standby mode. 
Both blue and red indicator lights will be illuminated for 2 seconds and then turn off.

[Note]:

 The camera will shut down automatically if it is in standby mode without any operation 

more than 2 minutes.

3.2. VIDEO RECORDING

3.2.1. Power on the camera by pressing the Power Button for 2 seconds. Both blue and 
red indicator lights will be illuminated for 3 seconds then turn off. The camera will start 
video recording automatically.
3.2.2. Press the Power Button twice to stop video recording. The blue indicator light will 
stay illuminated, indicating the camera has entered into standby mode automatically.
3.2.3. Press the Power Button once to resume video recording. The blue indicator light 
will turn off.

[Note]:

1). A video clip will be generated and saved every 10 minutes automatically.

2).Thecamera can record video for 100 minutes continuously on a full charge.

3).Video Resolution: 1920x1080PVideo Format: AVI

4). If the camera is in low battery, it will save video files then shut down automatically. Both blue 

and red indicator lights will be illuminated for 3 seconds then turn off, and they will flash 

alternatively for 4 seconds and go out.

5). If the internal memory is full during the video recording process, the camera will save allvideo 

filesthen shut down automatically. Both blue and red indicator lights will flash simultaneously for 

5 seconds then turn off.

3.3. NIGHT VISION VIDEO RECORDING

3.3.1. Power on the camera by pressing the Power Button for 2 seconds. Both blue and 
red indicator lights will be illuminated for 3 seconds then turn off. The camera will start 
video recording automatically.
3.3.2. Press the Mode Button for 2 seconds to turn on the IR LEDs. The red indicator light 
will flash 3 times then turn off.
3.3.3. Press the Mode Button once to turn off the IR LEDs. The blue indicator light will 
flash 3 times then turn off.

[Note]:

IR Distance: 1.5m

3.4. CAMERA/STILL PHOTOGRAPHY

3.4.1. Power on the camera by pressing the Power Button for 2 seconds. Both blue and 
red indicator lights will be illuminated for 3 seconds then turn off. The camera will start 
video recording automatically.
3.4.2. Press the Power Button twice to stop video recording. The blue indicator light will 
stay illuminated, indicating the camera has entered into standby mode automatically.
3.4.3. Press the Mode Button once to enter into still photograph mode. The blue indicator 
light will turn off while the red indicator light will stay illuminated.
3.4.4. Press the Power Button once to take a photo. The red indicator light will flash once 
every time you take a photo.

3.5. AUDIO RECORDING

3.5.1. Power on the camera by pressing the Power Button for 2 seconds. Both blue and 
red indicator lights will be illuminated for 3 seconds then turn off. The camera will start 
video recording automatically.
3.5.2. Press the Power Button twice to stop video recording. The blue indicator light will 

stay illuminated, indicating the camera has entered into standby mode automatically.
3.5.3. Press the Mode Button twice to enter into audio recording mode. Both blue and red 
indicator lights will stay illuminated.
3.5.4. Press the Power Button once to record audio only. The blue and red indicator lights 
will keep flashing alternately.
3.5.5. Press the Power Button once again to stop audio recording. Both blue and red 
indicator lights will stop flashing and be illuminated, indicating the camera is back to 
standby mode.

[Note]:

1). An audioclip will be generated and saved every 5 minutes automatically.

2). Audio Format: WAV

IV. Video/Image File Uploads

4.1. Power off the camera and unscrew the knob cover to reveal the USB port.
4.2. Connect the camera to a proper PC computer USB port by using the USB cable 
provided.
4.3. The camera will be recognized as a removable disk drive.
4.4. All the files can be accessed in the drive.

V. Setting Time/Date Stamp

5.1. Power off the camera and unscrew the knob cover to reveal the USB port.
5.2. Connect the camera to a proper PC computer USB port by using the USB cable provided.
5.3. The camera will be recognized as a removable disk drive.
5.4. Click on the drive in the root directory and inside root directory, open the file named “time.txt”.
5.5. Write the current date and time in the “time.txt” file with the correct format:
YYYY.MM.DD HH:MM:SS Y (For example: 2017.04.12 14:24:32 Y). If you don’t need the 
time stamp on the video footage, change “Y” into “N” in the “time.txt” file. (For example: 
2017.04.12 14:24:32 N). Save this file.
5.6. Restart the camera and the system will upgrade the program automatically.

VI. Charging

6.1. Power off the camera and unscrew the knob cover to reveal the USB port.

6.2. Connect the camera to an outlet AC power supply by using the DC5V power adapter 
and the USB cable provided.
6.3. The red indicator light will stay illuminated while the blue indicator light will flash 
slowly during the charging process.
6.4. It will take 2 hours to obtain a full charge.
6.5. Both blue and red indicator lights will stay illuminated when the camera is fully 
charged.

VII. Resetting

If for any reason, the camera stops responding or isn’t working properly, a quick reset will 
restore it back to normal operation.

Operation:

 When the camera is powered on, press the Power Button and Mode Button 

once simultaneously; the camera will shut down automatically. Then you can restart the 
camera with factory default settings.

VIII. Time Setting

8.1. Pull the Time Adjustment Knob until you hear a click. Both hour and minute hands will 
be stopped.
8.2. Rotate the Time Adjustment Knob to set time.
8.3. Push the Time Adjustment Knob back after the time set is completed.