Manufactured by WISMEC
10 second protection
If you hold the button for more than 10 seconds, the output will shut off
automatically and the button light will blink 10 times.
Low voltage protection
If the battery voltage is lower than 3.3V, the button light flashes 40 times and
then the device will shut down. You can charge the device via USB cable to
Precautions
1. This product are intended for use by adults 18 years old and over. Women
who are pregnant or nursing, people with certain health conditions may be
affected by this product. Please consult your health care practitioners
before use.
2. Keep all components away from children and pets.
3. Use the product only as instructed. Using your Venti outside of intended
use may cause damage to the device and/or the user.
4. Do not attempt to repair the unit by yourself as damage or personal injury
may occur.
5. Do not attempt to combine the Venti with parts from other brands of
e-cigarettes.
Warranty
Please consult with your WISMEC distributors for warranty or return policy.
We are not responsible for any damages caused by human error.
USB Cable Charge
Computer
Wall Adapter
unlock the low voltage protection mode.
Resistance detection
I
f the resistance of the atomizer is greater than 5 ohm, it is too high for device
to detect. When the button is pressed, the light will flash indicating there is no
atomizer.
If the resistance of the atomizer is less than 0.15ohm, the button light will
flash quickly 5 times.
Charging Process
The Venti is charged via USB port. It will take about 4 hours to fully charge the
battery with an 1A charger.
The button light will be stay red during charging and turned off when the battery
is fully charged.
Light Indicator
Stay Solid
Blink Moderately
Blink Quickly
Blink Slowly
Current Battery Power
60%-100%
30%-59%
10%-29%
0-9%
Battery Power Display
