Wisper 805FE Owner'S Manual Download

Page: 17 / 17

- 17 -

Exceptions to Limited Warranties

1. Damage resulting from misuse, not maintaining the vehicle or not following the guidelines within this

user guide.

2. Accidental or deliberate damage.

3. Damage due to private repair or alteration by user or unauthorised service centre.

4. Failure to produce invoice or proof of purchase.

5. Spare parts and components worn in normal use.

6. Failure to register your bike at

www.wisperbikes.com

within 14 days of purchase.

It is essential to get your spokes checked and tightened after 300km. If this service has
not been undertaken at the correct time this may cause damage to the wheels and spokes
that will not covered under our guarantee.

Service through

Your retailer
or
Wisper Ltd
10 Oakenbrow
Sway
Hants
UK
SO41 6DY
Tele: 01590 681553
Mobile: 07977 185830

douglas.lawson@wisperbikes.com
www.wisperbikes.com

Summary of Contents for 805FE


















Search results

Summary of Contents for 805FE

Reviews:

Related manuals for 805FE

Brands by name

Popular brands

Wisper 805FE, Owner'S Manual

Search results

Summary of Contents for 805FE

Reviews:

Related manuals for 805FE

Brands by name

Popular brands