4
2
Caring for your Wisper bike and pre-use checks
Your Wisper bike has been thoroughly tested at the factory prior to delivery, and undergone a pre-
delivery inspection by your Wisper Stockist.
It is very important that you check the bike thoroughly before its first use. Equally important are
frequent and regular spot-checks, as they will protect you and your Wisper bike.
Please read this manual carefully. Only on full understanding all of the functions of this electric
bicycle should you attempt to use it.
2.1
Before you set off for the first time
2.1.1
Check the handlebars and handlebar stem are properly tightened.
2.1.2
Check all other nuts, bolts and fixings are properly tightened.
Check all folding mechanism clamps are closed tight and locked.
2.1.3 Check brakes are functioning properly.
2.1.4 Check tyre pressures are correct and tyres are not damaged.
2.1.5
Check reflectors and lights if fitted, are functioning properly.
2.1.6 Make sure the battery is fully charged.
2.1.7 Load the battery into bicycle and turn on with the switch located at the rear right hand side
of the battery. To remove the battery, turn the battery key hold in unlocked position and
slide the battery out. Remove key from battery and keep save during operation of the bike.
2.1.8 Turn on the bike by pressing the on/off switch adjacent to the left hand grip for two
seconds. (Turn off the bike by repeating the same process).
