5
The bike will be ready to ride and the LCD will activate showing battery state, assist level,
time, trip and speed. Exerting pressure on the pedals or twisting the throttle will now
activate the motor.
IMPORTANT: Always start off in level 1 or 2 assistance to avoid the possibility of loss of
control. When you are moving forward then you can change to higher levels of assistance.
2.1.9 To avoid unplanned acceleration, always make sure that the LCD assist level is set to0 when
mounting, dismounting and turn the bike off when leaving it unattended.
To set the assist levels, toggle with the + and – buttons (see fig 1)
2.1.10 For full information regarding the LCD display please refer to separate hand book available
from Amps Electric Bikes or your retailer.
2.1.11 Remember to validate your warranty by visiting www.wisperbikes.com/mywarranty and
filling in your details.
2.2
Before each use
It is important you check your bike prior to each time you use it.Checks should include the following:
(If you do find any damage or problems, do not use the bike until the problem has been solved or
you have had the faulty item checked by an electric bike mechanic or your retailer).
2.2.1
Check the tyres for any visible damage.
2.2.2
Check the tyre pressures.
2.2.3
Check for any loose nuts, bolts or fixings.Check all folding mechanism clamps are
closed tight and locked.
2.2.4
Check the brake functions.
2.2.5
Check the electronic functions.
2.2.6
Check the reflectors are in place and the lights are working.
