43
ENGLISH
5.5 Controlling SafeSense
®
under-bed lighting via the GO button
5.4 Control of the under-bed lighting
- The under-bed lighting is automatically activated
each time the GO button is pressed
- to switch off this function, first press the LC key on
the box and then the key combination as shown
in the figure.
- Switch off control of the under-bed lighting using
the GO-button according to section 6.4
- Perform key combination according to illustration
- to switch this function on again, press the keys as
shown in the illustration in reverse order
- Use the keys in reverse order to reset this func-
tion.
If the motor already has a underbed light, it is recommended to disconnect it
from the motor during the permanent use of SafeLift or SafeSense
®
.
1
3
2
3
2
1
3
2
3
4
1
2
3
4
3
1
2
3
2
3
