8
1. Introduction
Thank you for purchasing the WLAN 802.11 b/g/n + BT3.0 SDIO module that provides the
easiest way to wireless networking. This User Manual contains detailed instructions in the
operation of this product. Please keep this manual for future reference.
System Requirements
-
128 MB of RAM or later (recommended)
-
300 MHz processor or higher
2. Driver/Utility Installation
The driver should have been installed before the media box is shipped from the manufacturer. You
can plug this adapter to your media box and start using its network function without installing
driver or utility.
3. Connecting to an Existing Network
1.
Use the remote control that came with your Blueray player to access the network
configuration settings page.
2.
Select the scanning wireless network function. The system starts to scan for available network.
On this list, click Refresh to refresh the list at any time
3.
Select the network you want to connect to.
4.
If the chosen network has security enabled, you will have to setup corresponding security
parameter. Contact the network manager for the correct settings. Select the security type and
fill in required parameters. The options include the following:
WPA/WPA2/CCKM
802.1x
Pre-Shared Key (Static WEP)
None
