MCR41/MCR42 User Manual
34
How assign a name and an expander to a Channel
Click and then Right click on a name/expander box presents in a Channel column on the grid and
select
Edit channel name/exp
to change name and expander of the channel (a combo box appears
with the list of the expanders present on the device).
Note
1
:
If not set, the expander is set to DSP_ENR by default
Note
2
:
Name and expander selected are the same for all groups
For example if Ch 03 Ch name = George and EXP = DSP_ENC :
-
if set GR 10 and CH 03 Ch name = George and EXP = DSP_ENC
-
if set GR 21 and CH 03 Ch name = George and EXP = DSP_ENC
Select
Write channel name/exp to device
for write name and expander of the channel on the
device.
Select
Read channel name/exp to device
for read name and expander of the channel from the
device.
Summary of Contents for MCR41
Page 9: ...MCR41 MCR42 User Manual 8 Advanced...
Page 43: ...MCR41 MCR42 User Manual 42...
