WISYCOM s.r.l. - Via Spin, 156 - I-36060 Romano d’Ezzelino (VI) - Italy - MTH300-eng-u03.doc
Tel. (Ph.). +39 0424 382605 - Fax +39 0424 382733 - http:// www.wisycom.com - e-mail: sales@wisycom.com
MTH300 QUICK USER GUIDE
MTH300 is a professional radio microphone especially design for broadcast/high quality
applications.
1. OPERATION
MTH300 is composed by 3 detachable parts:
1)
MIC Head
(available with cardioid/hypercardiod polar pattern).
2)
MIC Body
(the below part can be open to access “Display & Setup controls” area
(fig.1) and on the back the “Batteries holder & Infrared” area (fig. 2).
3)
MIC Antenna
, made with fibreglass reinforced housing and with a “Wireless power
switch” (fig. 3). “MIC Antenna” is fastened to body with 2 anvils and a micro-
connector.
1.1 LED INDICATION (POWER SWITCH)
Led indication with bicolor led (red & green) on wireless power switch (fig. 3):
- Wireless
transmission
status: green on/off)
-
Battery status: green steady, slowly blinking (< 25%), quickly blinking (<12%)
-
Modulation peek (if activated): red
-
Ptt status: red if active
1.2 BATTERIES
MTH300 is working with 2 AA alkaline or NiMH batteries (select correct type on setup controls).
Battery status can be checked on internal OLED display or looking to LED status on power
switch (see 1.1)
1.2.1 BATTERY
SUBSTITUTION
Open MIC body: unscrew counter-clockwise the below cover to access batteries holder;
Take out below battery to release upper battery leverage;
2
nd
battery falls down and can be removed.
Wireless power switch
with programmable
LED indication
(green/red).
Open MIC Body:
Unscrew & slide down cover, to
acces internal setup controls and
batteries holder & infrared.
Fig. 1 Display & Setup controls
Fig. 2 Batteries holder and infrared
Fig. 3 Wireless
power switch
Exchange head
:
unscrew it counter-clockwise
1
2
3
