WT-W0301
Smart Plug
Witstec Technology (Shenzhen) CO., LTD.
第
2
页
Two
、
Installment instruction
1
、
Add device
Using the app "Witstec" independently developed by Witstec , add
the smart plug WT-W0301 to the device list through the device
management page.
(
1
)
Open the APP (Picture 1) , APP version should be not lower than
version 1.4.0 version .
(
2
)
On the
“
Device List
”
page, click
“
+
”
to add the device
(Picture 2) and enter the device list page (Picture 3).
(
3
)
Select the device WT-W0301 to be added and enter the add
page.
(
4
)
According to the instructions of the APP Add page, gradually
add the smart plug (Picture 4).
2
、
Paring steps
·
The device is properly connected to the power supply and working
properly.
·
Press the device pairing button, keep holding for 5 seconds, until the
indicator light flashes, click
“
Next
”
, enter paring mode .
·
Select WI-FI, enter the WI-FI password, click the
“
Start Pairing
”
button, and wait for the initialization to complete.
·
Set the alias of the device , then complete the binding operation.
3
、
Control method
·
Device management page
(
Picture 5
),
Control settings via panel or
on/off button.
·
Timing control function
(
Picture 6
):
Device status changes, action
execution time and frequency can be set.