11.
Slip the front of the shoe guide into the metal insert in the front of the machine. Slide the
other end around the center brush and through the hole behind the brush. Turn over and
lock in place with spring clip.
12.
Attach the motor tension spring to the motor and turn back over.
13.
Re-connect the electrical fittings in the handle assembly to the fittings extending out of
the body.
14.
Screw the handle assembly back into place. Start each of the 3 screws on each side before
tightening, this will insure proper alignment of the handle assembly.
15.
Tighten all 6 machine screws.
16.
Plug into outlet.
17.
Your Neet Kleet is now ready for operation.
