5
Regular Cleaning *)
1
2
3
Opening and disconnecting
• Open the door by turning key clockwise
(1).
Ingredient canisters
• Pull base tray
(2) forward.
• Push the outlet tubes upwards to close the
outlet spouts of the canisters
(3).
• Take the canisters by the handles and pull
them forward to the end stop in guiding rails
(4). The lids are automatically triggered open.
• If required, the canisters can be removed by
lifting canisters upwards and pulling forwards
over the end stops in guiding rails
• Fill canisters with ingredients.
• Press lid slightly down and push back
canisters.
• Push the outlet tubes downwards to open the
outlet spouts of the canisters
(5).
Cleaning parts
Base Plate
• Wipe the base plate clean and push it back
in place.
Cup carrier
It is recommended to have the cup carrier as
an exchange kit (hygiene kit).
• Remove cup carrier: Take hold of the cup
carrier with your right hand
(6) and remove
the corresponding retaining pin
(7), situated
on the rear side of the cup station, with your
left hand.
• Clean the drip grid
(8a) and tray (8b) in hot
water with cleaning agent and dry parts.
4
*)
All parts to be cleaned regularly are
designed in a light blue colour. All parts
of action are supplied in a green colour.
(see overleaf)
8
7
a
b
6
5
