8
Deep Cleaning (continued)
(see overleaf)
Cleaning parts
Dispense head
• Remove hoses from dispense head: turn
each hose spout until its locking tab can be
released through the notch of the
corresponding hole in dispense head
(9).
• Remove the dispense head by pulling it
forwards
(10).
Base tray
• Remove and clean the base tray
(11).
Cup carrier
• Remove the cup carrier
(12).
• Clean the complete cup carrier
(13a,b)
(
see Regular Cleaning).
Drip tray
• Release lock for drip tray
(14) (see Regular
Cleaning).
• Remove the drip tray
(15) and empty it.
clean and dry parts.
(see Regular Cleaning).
Wipe sensor in lid dry.
Cleaning inside and outside
• Clean the door and housing inside and
outside, and finally the bottom with a clean,
damp cloth.
• Flush all parts, which have been soaking,
thoroughly with clean and warm water.
Check that no dirt or cleaning agent
remains on the parts.
• Dry all parts with a dry cloth.
12
13
15
a
b
14
9
10
11
