ATTENTION – SAFETY REQUIREMENTS
-The correct installation and use of this cycle carrier is the sole responsibility of the user.
-
Weight and maximum capacity of “ZX200” series cycle carrier:
-
Model ZX204 (17.50 kg) - 4 cycles,
max. capacity 60 kg
. Max individual cycle weight 15 kg.
-
Model ZX203 (14, 74 kg) - 3 bikes,
max. capacity 51 kg
. Max individual bike weight 17 kg.
-
Model ZX202 (11, 63 kg) - 2 bikes,
max. capacity 34 kg
. Max individual bike weight 17 kg.
-Never exceed the vehicle manufacturer’s static nose weight.
The combined weight of the cycle carrier and the load must never exceed the permitted
capacity. Keep the towball ball surface clean from dirt and oil.
-Remove from the transported cycles children’s seats, transport baskets, rain covers or
other elements that could get lost or increase the air resistance.
-The cycle carrier is only suitable for transporting bicycles.
-Before leaving, check that the rear lights function correctly.
Also check that the indicator lights work correctly.
-Ensure that the cycle carrier is fitted correctly on the towball and that the cycles
are secured as instructed.
When on the road, respect the highway code speed limits and pay attention to
the road conditions to prevent jolts.
-Be aware that the loaded cycle carrier may change the driving characteristics of the
car while braking, during windy conditions and whilst cornering.
-To avoid damage, if the boot lid is equipped with an automatic opening function,
use this function with care.
-Check all the cycle carrier fixing elements after a short while, then at regular intervals
whilst on your journey.
-Take care when reversing and parking because of the greater length of the car.
-Check the distance between the cycle carrier, the cycles and the exhaust pipe(s) to
avoid heat damage.
-To increase road safety and to reduce fuel consumption, remove the cycle carrier
when not in use.
-Modifications to the cycle carrier and its components are not permitted.
-Immediately replace any worn or damaged parts using only original spare parts.
-The cycle carrier can be cleaned using warm water and/or car shampoo.
-Store the cycle carrier in dry conditions at moderate temperatures.
The manufacturer is not responsible for damage caused by improper use of this
product, nor for any objection made by the competent authorities with regard to
the highway code.
The manufacturer shall only be responsible for manufacturing defects in the cycle
carrier and accessory components.
13mm x 1
+
10mm x 2
8mm x 1
Zur Erstmontage benötigte Werkzeuge:
DE
Montageanleitung und Nutzerhandbuch
Folgende Informationen müssen beachtet werden, wenn das Produkt benutzt
wird:
Das Produkt ist sicher, wenn es richtig benutzt wird. Inkorrekte Benutzung kann
zu Personen-und Sachschäden führen, die sowohl Sie selbst als auch hinter Ihnen
fahrende Fahrzeuge betreffen kann.
2,3 oder 4 x
UK-Modelle
EU-Modelle
Fahrradträgersysteme
Montageanleitung und Nutzerhandbuch
ZX300 Fahrradträgerreihe
Heckfahrradträger für die
Anhängerkupplung
km/h
130
6mm x1
ZX
3
02
/EU
ZX
3
03
/EU
ZX
30
4
/EU