Set weather symbol manually
After the base unit power on, the weather symbol will flash on the display.
1. Set the appropriate weather symbol with the
UP
and
DOWN
buttons.
2. Press the
SNOOZE•LIGHT
button to select.
Information
:
The weather symbol can set Sunny, partly sunny, cloudy, rainy and heavy rain manually,
snow symbols will be displayed when outdoor temperature is below
-30.2°F.
The weather symbol will only be automatically displayed 24 hours later.
Radio frequency connection
After weather symbol selected, radio frequency symbol
will flash on the display and the device will start
to receiving RF signal from wireless sensor for 3 minutes, the corresponding outdoor temperature and
humidity values will be displayed.
If NOT received successfully, press and hold the
CH
button to reconnect.
Setting the time and date manually
1. Press and hold the
MODE
button until the display for the year begins to flash.
2. Set the year with the
UP
and
DOWN
buttons.
3. Press
MODE
to store the setting. The date format will flash on the display.
4. Set the date format with the
UP
and
DOWN
buttons (Month/Day or Day/Month).
5. Press
MODE
to store the setting.
6. Continue as described:
- Set a value with
UP
and
DOWN
.
- Store a setting with
MODE
.
7. Set the following settings one after another:
- Month
- Day
- Hours
- Minutes
- Hour format (in the 12-hour format, the afternoon hours are shown with “PM” on the display)
- DST (on or off)
- Language (only refers to how the days of the week are displayed)
- Air pressure unit (inHg or hPa)
8. Then press
MODE
to store the changed setting.
Choosing the location
ATTENTION
- Protect the base unit and wireless sensor from dust, shocks, extreme temperatures and direct sunlight.
- Protect the base unit from moisture. Only place the base unit in a dry, enclosed space.