- If possible, use alkaline batteries instead of zinc-carbon batteries. Alkaline batteries last
longer, particularly outside in low temperatures.
Using addition wireless sensors
The device comes with one wireless sensor. However, you can operate it with up to three
wireless sensors. Additional wireless sensors are available via our online shop.
• The wireless sensors can be located in different rooms or outdoors.
• Every sensor must be assigned its own sensor number (= number of the transmission
channel) (1 to 3).
• For the snow and frost warning, the base unit only analyses the information from the
sensor with the lowest number (by default 1). If only one sensor is connected to channel 1, 2
or 3, the display will function on all 3 channels.
Procedure:
1. Remove the battery compartment cover on the back of the wireless sensor.
2. Set a different sensor number for each wireless sensor with the sliding switches.
3. Put the battery compartment cover back in place on the wireless sensors. If adding
another sensor later or after changing the batteries:
4. Press and hold the
CHANNEL
button on the base unit until the radio frequency symbol
flashes. The base unit will now retrieve the weather information from all available
wireless sensors.
Base unit
You can operate the wireless base unit using the power adapter or with batteries. If the base
unit is connected to a power socket, it will be operated using the power mains, even if there
are batteries in the device. Remove depleted batteries from the battery compartment, as
they can leak.
A) Power mains operation
ATTENTION
Use only the power adapter included in the delivery for power mains operation.
1. Insert the power adapter included in the delivery into the base unit port.
2. Plug the power adapter into a socket that corresponds to the voltage listed in the
Technical Data.
3. Wait several minutes. The base unit needs this time to collect all the weather data.
