Bedienungsanleitung Nr. 9999-041-0
Seite 5
B7202_E_1
.pmd
12.06.2003
8.3.2 Deactivating a timed delay period
Possible only with the electronic lock open and only with the master combination.
Initiate programming
Select P - No. 3
Confirm the entry
Enter 6-digit master combination, e.g.
Confirm the entry
Entry
Confirm the entry
Cancel
Green LED blinks once
OK = green LED blinks once
and low-high tone sounds.
Error = 12 high-pitched
tones and red LED lights.
Function
Operation, button(s)
Response
Comments
8.4 Programming a time-lock period
Possible only with the electronic lock open and only with the master combination.
Initiate programming
Select P - No. 6
Confirm the entry
Enter 6-digit master combination, e.g.
Confirm the entry
Enter the time-lock period, e.g. °
Confirm the entry
Cancel
°
= 1 hour to
= 99 hours
Green LED blinks once
OK = green LED blinks once
and low-high tone sounds.
Error = 12 high-pitched
tones and red LED lights.
Function
Operation, button(s)
Response
Comments
8.4.1 Starting a time-lock period
The time-lock period will commence automatically, immediately
after it has been programmed. During the time-lock period the red
LED will blink every 30 seconds and the keypad will not respond
to any entries at all.
Once the programmed time-lock period has elapsed the electronic
lock can be opened using either the master combination or a
user combination.
The time-lock period will run to completion once only after it has
been entered. The electronic lock will then be released for opening
until such time as a new time-lock period is programmed.
When the interlock feature is active it will be necessary to enter
two different combinations
, one after another, to open the
electronic lock. Any two combinations may be used. It is not possible for the master combination owner
alone
to open the lock
by entering the master combination twice; a second, user combination will have to be entered.
8.5 Activating a combination interlock (duality principle)
Possible only with the electronic lock open and only with the master combination.
At least two user combinations will have to have been programmed beforehand as otherwise an error signal will sound.
Initiate programming
Select P - No. 2
Confirm the entry
Enter 6-digit master combination, e.g.
Confirm the entry
Activate combination interlock
Confirm the entry
Cancel
Green LED blinks once
OK = green LED blinks once
and low-high tone sounds.
Error = 12 high-pitched
tones and red LED lights.
Function
Operation, button(s)
Response
Comments