Bedienungsanleitung Nr. 9999-041-0
Seite 7
B7202_E_1
.pmd
12.06.2003
We can assume no liability for malfunctions caused by erroneous resetting or by the application of force or by improper
handling, nor for damages to property or assets which, for example, are due to not closing the safe properly.
We recommend obtaining appropriate insurance coverage to protect the contents of your safe. Your property insurance sales agent
can provide details.
Our model 7201 to 7205 locks have been certified as Class 1 products by VdS (the Property Insurers’ Association in
Germany).
10. Troubleshooting
Problem
Possible cause
Remedy
No operating tone and the LED does
not light.
Batteries dead or reversed during
installation.
Replace the batteries or install them
properly.
Keypad lever cannot be moved even though a
valid combination has been entered correctly.
Batteries are too weak to release
the electronic lock.
Replace the batteries.
Green LED blinks at 5 second intervals;
the electronics do not respond to any
keypad entries.
A timed delay period has been
inadvertently entered.
See notes at Sections 7.3 and
8.3.1.
12 signal tones, red LED lights
Master or user combination entered
incorrectly.
Verify master or user combination.
The red LED blinks every 30 seconds;
the electronics do not respond to any
keypad entries.
A time-lock period has been inadvertently
entered.
See Sections 8.4 and 8.4.1.
10 high-low warning tones; red and
green LEDs blink alternately.
Insufficient battery charge.
Replace the batteries.
If it is not possible to open your safe in spite of having carried out the instructions above, then please contact the safe manufacturer.
