2
Primor 1000 / 3000 / 3010 / Level 5
1 General instructions
•
Please read the operating instructions carefully, before activating the lock.
1.1 Liability notes
• We don’t assume liability for malfunctions due to incorrect operation, use of force or inappropriate handling. In cases of
damage to property or valuables, which are due to incorrect locking of the safe, we also don’t assume liability.
• If your safe, however, does not open correctly with the following instructions, please contact the manufacturer of the safe.
1.2 Operating notes
• Before operating the lock it has to be checked which input unit is combined with the lock.
- The input unit RO got only one LED. It will not be considered separately in the following manual.
• Assess a person to administer the lock. This person will be the master. 1 user can be programmed
.
• Programming can be done when the lock is opened or closed. For safety reasons we suggest you to do it while the lock is
opened.
• If the lock is not opened or closed within 3 seconds after entering the code, the electronics switch off. Re-enter the code and
repeat the process
• When the time between touching keys exceeds 10 seconds the process of programming and entering is deleted. The old
code or programmes stay valid.
• Every correct input while entering the code is confirmed by an acoustic signal and flashing of the red LEDs. These signals will
not be considered in this instruction.
• The red LEDs flash during the whole process of programming. These signals will not be considered in this instruction.
• Never use force.
• Do not open the lock case, otherwise you compromise the function of the lock and warranty will be void.
1.3 Notes on safety
• Due to security reasons change the factory code of 1 2 3 4 5 6 immediately.
• For your new code, do not use any personal data like birthdays or any other data, which could be known by knowledge of
your person.
• Simple codes that can be guessed easily i.e. 1 2 3 4 5 6 must not be used.
• Your code has to be secret.
• Don’t write down your code.
• Don’t safe your code on your PC, a DVD, a USB-stick or your mobile.
• Change your code frequently for example every three months.
• After entering the new code, the electronic lock should be opened and locked several times with the safe door opened.
• After each locking doublecheck if the safe is closed.
1.3.1 Security notes emergency lock
• Due to security reasons it is recommended not to leave the key unattended in the lock.
• Don’t store the key in the safe.
• The keys have to be stored at a safe place and may only be accessible by authorized persons.
• When losing the key exchange the lock immediately.
• Make sure after each locking if the safe is locked.
