10
Installation instructions Primor 1000
09.11.2012
6 Installation input unit FS
• In order to fix the input unit to the door, 2 threaded holes M5 have to be drilled into the front of the door.
• A passage drilling with min. Ø 8 mm and max. Ø 11 mm is required for the connection cable to the input unit.
• Afterwards the input unit has to be fixed with the enclosed cylinder screws M5 from the front. Do not damage the input unit
when doing this.
Fixing position for screws M5
Fig. 14: Installation dimensions input unit FS
Cable opening