8
Installation instructions Primor 1000
09.11.2012
5 Installation input unit FL (fixing on the inside)
• Fixing from the inside: There are two threaded holes M5 on the back of the input unit. It has to be fixed through 2 passage
holes with the back of the door. (EN 1300 B - VdS Class 2)
• A passage drilling of Ø 8 mm for the connection cable is required in the door, centric of the input unit. Watch out that through
this drilling as well as the fixing screw drillings of the input unit, no access to security relevant components is possible.
Fig. 12: Installation dimensions input unit FL (fixing on the inside)
Fixing position for
screws M5
Centre of drilling
identical for front and
inside fixing
Fixing position for
screws M5
Cable opening
Emergency power supply
External battery compartment
