Wittkopp Primor 2000 / Level 15, User Manual

2

Primor 2000 / Level 15

1 General instructions

•

Please read the operating instructions carefully, before activating the lock.

1.1 Liability notes

• We don’t assume liability for malfunctions due to incorrect operation, use of force or inappropriate handling. In cases of

damage to property or valuables, which are due to incorrect locking of the safe, we also don’t assume liability.

• If your safe, however, does not open correctly with the following instructions, please contact the manufacturer of the safe.

1.2 Operating notes

• Before operating the lock it has to be checked which input unit is combined with the lock.

- The input unit RO got only one LED. It will not be considered separately in the following manual.

• Assess a person to administer the lock. This person will be the master. Up to 9 users can be programmed. They receive PIN

1-

9 (PIN = Personal identification number). The code of the user 9 is also the instant opening code when a time delay is

activated.

• Programming can be done when the lock is opened or closed. For safety reasons we suggest you to do it while the lock is

opened.

• If the lock is not opened or closed within 3 seconds after entering the code, the electronics switch off. Re-enter the code and

repeat the process

• When the time between touching keys exceeds 10 seconds the process of programming and entering is deleted. The old

code or programmes stay valid.

• Every correct input while entering the code is confirmed by an acoustic signal and flashing of the red LEDs. These signals will

not be considered in this instruction.

• The red LEDs flash during the whole process of programming. These signals will not be considered in this instruction.
• When entering a valid user code instead of the master code, it will be confirmed at first but denied in the second step.
• Never use force.
• Do not open the lock case, otherwise you compromise the function of the lock and warranty will be void. 

1.3 Notes on safety

• Due to security reasons change the factory code of 1 2 3 4 5 6 7 immediately.
• For your new code, do not use any personal data like birthdays or any other data, which could be known by knowledge of

your person.

• Simple codes that can be guessed easily i.e. 1 2 3 4 5 6 7 must not be used.
• Your code has to be secret.
• Don’t write down your code.
• Don’t safe your code on your PC, a DVD, a USB-stick or your mobile.
• Change your code frequently for example every three months.
• After entering the new code, the electronic lock should be opened and locked several times with the safe door opened.
• After each locking doublecheck if the safe is closed.