22
www
.wittur
.com
Changes can be made without notice
PM.2.004923.EN - 811-000-000 SDS
©
DC-PWM Compatible · Edition 22 July 2020
Drive - Instruction Manual
7 INSTRUCTION WITH HANDSET
7.1 HANDSET (OPTIONAL)
Fig. 1
Optional Kit - cod. B147AABX
Recommendation!
Although the handset (see picture 1) can be directly connected by the installer/maintenance personnel to the door controller on the car’s
roof, the ideal situation is to have a connection with the door controller inside the car (see picture 2).
In this way the installer/maintenance personnel can work in absolutely safe conditions and can control the movement of the coupled
doors during their effective operational mode.
To make this connection, ask Sematic for the appropriate adapter cod. B147AABX (see picture 3) (a 16 mm. diameter hole is required in
any chosen position within the Car walls).
Note
: when the handset is connected to the controller the display shows the warrantly expiration date (2 years from the manufacturer
date) and the activity hours left before warrantly expiration. Subsequently choose the language by means of the keys
ä
and
ã
and
confirm the choice through the “OK” key.
Important note:
when the handset is connected, all the signals from the main lift controller (but not the K2TB, if used) and Kn are ignored;
this in order not to interfere with the commands sent through the handset.
The output LA and LC are both kept OPEN (not valid condition in normal operation).
If Monitor menu is selected also Kn is monitored. When the MLC Monitor menu is selected, though, the system performs as if the handset
was not connected at all, allowing the complete monitoring of input/output signals by means of the handset.
