28
www
.wittur
.com
Changes can be made without notice
PM.2.004923.EN - 811-000-000 SDS
©
DC-PWM Compatible · Edition 22 July 2020
Drive - Instruction Manual
•
Using keys
ã
and
ä
, run through the GENERAL OPTIONS and choose the option LIMITED DOOR REVERSAL
•
Press key “OK” to confirm the choice
•
The following options are viewed on the display:
−
OFF
−
ON
•
Using keys
ã
and
ä
, choose the required option and press the “OK” key to confirm it
•
The display shows the confirmed option and restores the menu GENERAL OPTIONS
•
The following options are available:
−
“BACK”: Press key F1 to restore the menu GENERAL OPTIONS
−
“MENU”: Press key F3 to restore the MAIN MENU
8.6 ACTIVATION OF THE CAR DOOR LOCKING DEVICE SETTING BY MEANS OF THE HANDSET
•
“6.5 Car Door Locking Device (USA = Restrictor)” a pag. 19
for the meaning of this parameter
•
Using keys
ã
and
ä
, run through the GENERAL OPTIONS and choose the option CAR DOOR LOCKING DEVICE;
•
Press key “OK” to confirm the choice
•
The following options are viewed on the display:
−
OFF
−
ON
•
Using keys
ã
and
ä
, choose the required option and press the “OK” key to confirm it
•
The display shows the confirmed option and restores the menu GENERAL OPTIONS
•
The following options are available:
−
“BACK”: Press key F1 to restore the menu GENERAL OPTIONS
−
“MENU”: Press key F3 to restore the MAIN MENU
8.7 ACTIVATION OF THE GLAZED PANELED DOORS SETTING BY MEANS OF THE HANDSET
•
“6.6 Full or framed Glazed Paneled Doors” a pag. 19
for the meaning of this parameter
•
Using keys
ã
and
ä
, run through the GENERAL OPTIONS and choose the option GLAZED PANELED DOORS
•
Press key “OK” to confirm the choice
•
The following options are viewed on the display:
−
OFF
−
ON
•
Using keys
ã
and
ä
, choose the required option and press the “OK” key to confirm it
•
The display shows the confirmed option and restores the menu GENERAL OPTIONS
•
The following options are available:
−
“BACK”: Press key F1 to restore the menu GENERAL OPTIONS
−
“MENU”: Press key F3 to restore the MAIN MENU
8.8 AUX OUTPUT RELAY SETTING BY MEANS OF THE HANDSET
•
“6.7 Aux Output Relay” a pag. 19
for the meaning of this parameter
•
Using keys
ã
and
ä
, run through the GENERAL OPTIONS and choose the option AUX OUTPUT RELAY
•
Press the “OK” key to confirm the choice
•
The following options are viewed on the display
−
OFF
−
GONG WHILE OPENING
−
SPACE PERCENTAGE
•
Using keys
ã
and
ä
, choose the required option and press the “OK” key to confirm it; If the option “SPACE PERTENTAGE” is chosen,
the present space percentage is viewed on the display. To modify it, use key
ã
and
ä
as shown on the display right side. Confirm
the required option by pressing the “OK” key. The display shows the confirmed option and restores the menu GENERAL OPTIONS
•
The following options are available:
−
“BACK”: Press key F1 to restore the menu PROFILE SETTING
−
“MENU”: Press key F3 to restore the MAIN MENU
8.9 PROTECTIVE DEVICE LOGIC KN SETTING BY MEANS OF THE HANDSET
•
“6.9 Protective Device Logic Kn” a pag. 19
for the meaning of this parameter
•
Using keys
ã
and
ä
, run through the GENERAL OPTIONS and choose the PROTECTIVE DEVICE LOGIC option
•
Press the “OK” key to confirm the choice
•
The following options are viewed on the display:
−
ON OBSTRUCT. : CLOSED
−
ON OBSTRUCT. : OPEN
•
Using keys
ã
and
ä
, choose the required option and press the “OK” key to confirm it
•
The display shows the confirmed option and restores the menu GENERAL OPTIONS
•
The following options are available:
−
“BACK”: Press key F1 to restore the menu PROFILE SETTINGS
−
“MENU”: Press key F3 to restore the MAIN MENU
8.10 EMULATION TYPE
•
“6.10 Emulation Type” a pag. 20
for the meaning of this parameter
•
Using keys
ã
and
ä
, run through the GENERAL OPTIONS and choose the EMULATION TYPE Option
•
Press the “OK” key to confirm the choice
