16
WT-218 GSM Car Alarm System
WT-218 – USER MANUAL – Rev.1 – Technical Support:
technical@witura.com
COPYRIGHT ©2008 WITURA CORPORATION SDN BHD
(1)
Our system has GSM car mobile phone, the use method is the same as normal
mobile phone.
(2)
Our car mobile phone is consist of antennal, loudspeaker and wireless, hand-free,
built-out microphone
(3)
The car phone function is invalid when system is alarming
(1) First, make sure that the standby battery is off. Use tools to take out the SIM
card slot, insert the SIM card into it according to the shape of the card slot, and
then put it into base unit. The device is electronic compressor lock after factory,
Please contact with the factory if need the gas compressor.
(2)
Connect with power
First, connect with the 12V main power source.
Observe that LED indicates net signals or not
Open the back-up battery.
(3)
Function check
Lock & unlock by remote operation.
Set alarming number.
Test of the alarming number: OK
(1)
Main unit
Working voltage: 12V
Static current: 40mA-60mA
Working frequency when arming and disarming: 400MHz-433MHz
Cover scope: same as GSM
Alarming time: alarm until disarm or answer the phone which receive signals (2)
Sound or mute alarming depends on the design of the car after factory
NOTICE
PARAMETER
8.
GSM CAR MOBILE PHONE
