background image

 

 

2

WT-218 GSM Car Alarm System 

WT-218 – USER MANUAL – Rev.1 – Technical Support: 

technical@witura.com 

  

COPYRIGHT ©2008 WITURA CORPORATION SDN BHD 

 

 

   

GSM Remote Car Alarm System is the new version of car one-way or two-way alarms 
system. It combines the GSM mobile communication, GSM locating technology and 
MECROCHIP rolling code technology, multi-code mating and microcomputer technology. 
The car owners can control the car remotely by cell phone in another place even in 
another city. The system can call emergency help to the mobile or fixed phone 
automatically.  

 
 

The functions of GSM remote car alarm system 
 
1.

 

Ensure the safety of company and personal vehicles. 

2.

 

Prevent the occurrences of crimes to vehicles. 

3.

 

Decrease the compensation of insurance. 

4.

 

Give alarm in time 

5.

 

Be convenient for taxi and transportation companies to manage vehicles 

 

 

 

 
 

One main unit ,two remote controllers ,one wireless remote keyboard, one shock sensor, 
siren, loudspeaker, one GSM antenna, one relay, one emergency button, LED, 5 PIN wire 
harness, 12 PIN wire harness, microphone , user manual. 
 
I:  

The Main Unit  

 

 

 

<Please refer to the wiring diagram of installation and do according to the diagram 
when install> 

PRODUCT OVERVIEW 

THE LIST OF PARTS

 

Summary of Contents for WT-218























Reviews: