Original operation manual
2K GEL UNIT
17
2KGel_14025_25015_BAoDB_en_1701 • rs
Machine description
3.3 Machine design
The
2K GEL UNIT
is available in two variants, which differ through the output:
➤
the 14025 has an output up to 14 l/min at a free flow rate
➤
the 25015 has an output up to 25 l/min at a free flow rate
Each unit type can optionally be equipped with the attachment kit for suction
hoses or the attachment kit for the hopper.
Both attachment kits can be exchanged at any time.
Depending on the machine type, a flush pump is installed on the frame of the
machine.
Material hoses are connected to the material outlets of the pump and to the
external mixing unit.
By default, all parts of the machine are installed on a common cart.
3.3.1 Injection unit with attachment kit for suction hose
3
1
2
4
5
6
7
8
9
10
11
12
Fig. 4: Front view and rear view of an injection unit with attachment kit for suction hose
No. Designation
1
Cart
2
Air supply
3
Air motor (proportioning pump)
4
Ground cable
5
Fluid pump for component B
6
Fluid pump for component A
7
Flush pump (optional)
8
Material pressure display for component A
