Safety
Original operation manual
HIGH PRESSURE CLEANER
HPC_BADBK_en_1805 • rs
11
2.2.4 Explosion protection
WARNING
Devices that are not explosion-protected must not be used in operating
facilities that fall under the explosion protection ordinance!
Explosion-protected devices can be identified by the corresponding
mark on the type plate and/or the ATEX declaration of conformity
provided!
Explosion-protected devices fulfill the requirements of the ATEX Directive
for the device group, device category and temperature class cited on the
type plate or in the declaration of conformity.
The owner is responsible for designating the zoning in accordance
with ATEX Directive, Appendix II, No. 2.1–2.3 in accordance with the
stipulations of the responsible regulatory body. The owner is required
to check and ensure that all technical data and labeling comply with the
applicable stipulations according to ATEX.
Please note that some parts have their own type plate with separate
labeling according to ATEX. In this case, the lowest explosion protection
of all labels displayed applies for the entire device. The owner is required
to implement appropriate safety measures for applications in which a
failure of the device could lead to dangers to personnel.
WARNING
The spray mist from liquids containing solvents is highly flammable,
explosive and toxic!
➤
Never use liquids containing solvents, such as paint thinners,
gasoline or oil, as cleaning solutions.
2.2.5 Health risks
CAUTION
When handling cleaning agents, oils, greases, and other chemical
substances, observe the safety and proportioning instructions of the
manufacturer and the generally applicable regulations.
CAUTION
The device may not be used to remove materials that contain
hazardous substances (e.g. asbestos).
