Translation of the original Operation Manual
6-3
•1307_PU280_SV1018DV1020_BAoDB_en•ski
en
Operation
Figure 6.6
➤
To relieve the pressure open the valve of the component with the higher pres
-
sure.
Use a collecting vessel for the
corresponding component!
Carefully open only the material valve of the
component with too high pressure to allow
pressure compensation!
Figure 6.7
➤
After this pressure compensation close the valve again.
6.
Mounting the spray gun
➤
Mount the spray gun to the block.
Follow the notes in chapter
“11.3.4 Connect the spray gun to the hose pack-
7.
Adjust the desired spraying pressure
Spray Gun
Feed Pump
Proportioner Pump
6,5 bar
/ 94 psi
6 bar
/ 87 psi
3 bar
/ 43,5 psi
Figure 6.8
8.
Start spraying
➤
Unlock the spray gun.
➤
Start the spraying process on a test area away from the area to be covered.
Observe the chapter
“11.3.6 Start spraying”, p. 11-8.
max. pressure difference:
Summary of Contents for DUOMIX PU280
Page 68: ......