Translation of the original Operation Manual
8-3
•1307_PU280_SV1018DV1020_BAoDB_en•ski
en
Barrel change
Thoroughly clean the material outlet opening on the connection block before
repeating the procedure
-
with the other components.
Figure 8.3
4.
Operation
➤
You may continue with the normal operation of the system as per chapter
Pay attention to the pressure equalization of both components!
1.
End spraying process.
+
Figure 8.4
2.
Exchange empty material drums for full ones.
➤
Place the feed pumps securely into the filled material drums
➤
Mount the return flow hoses and secure them against accidental slipping out.
Screw fitting return flow on drum lid of
Poly components
(optional)
Screw fitting return flow on silicagel filter
on drum lid of Iso components (optional)
Figure 8.5
8.2 With circu-
lation
(optional)
Summary of Contents for DUOMIX PU280
Page 68: ......